Original message
| FSGS
 |  "Hussmann Display Freezer"
, posted Fri 6 Oct 00:38  
I have concerns on a Hussmann ARL01950 that is somewhat noisy .
A repairman said "its about normal" but sounds like a noisy cheapo dishwasher while the other boxes sound like a home refrigerator - sometimes it makes like a whine noise.
Also trying to obtain a temp control for this unit is getting to be a chore. Everyone blames Hussmann -- even Hussmann did not return my email(s) - 3 monthes of trying + getting 3 different part numbers makes me leary ( 1701516 Or 1700506 or Ranco A30-3789 ) --I no longer can tell me if I am getting the correct part
Also if the parts situation is that difficult -- and the compressor turns out to be defective -- how does one get the coverage of the 5 yr replacement on the compressor ?
All an all this has be a pain - repeated failures + noise + impossable source of parts
If someone cares to comment I will appricate it
|
|
Replies:
|
| fitter597
| "Re(1):Hussmann Display Freezer" , posted Sat 7 Oct 19:49
I have tryed to go thru a manufacture once to get a part, it was the last.
Any local refrig. supplier will have any part you need, it maybe different but it will work, you can buy a ranco digital cold control that can fit and work your system better, it takes a little rewiring and some new mounting, but the extra work is well worth it, better control, easy to use, no wait.
You need a good refer tech, most know not to go thru the manufacture, unless you are trying to warranty.
Pipefitters Local 597
" We do it right the first time"
|
|
|
