Original message
| csmpez | "Houston204... Question about TH8320U T-Stat" , posted Tue 22 Jan 17:58  
I'm going to install this T-Stat for my upstairs zone (Trane Heat Pump) which is electric with Auxiliary and Emergency Heat. Wiring is pretty straight forward, but I was questioning the set up functions, Settings and Options. Based on what the info here and the installer set up guide it says the following:
0170 = 7 0190 = 0
However, what is your advise/recommendation on the following:
0240 = 9 (electric furnaces) 0250 = Should not apply, so would I keep this at 5 Gas or oil furnaces of less than 90% efficiency even though it's electric in the upstairs and there is no second stage.
Thanks.
Scott
| |