Payne Furnace Blower Motor - http://www.hvacmechanic.com/ Forums

Original message

Hennemann

71.230.20.123

"Payne Furnace Blower Motor" , posted Sat 23 Feb 14:52

Looking for a replacement blower motor...but having trouble finding....

GE Motor 1/3 Hp 1075 RPM 5KCP39GG S336S....the motor housing is stamped S36XRV. The unit is about 5 to 6 years old. Brown, White, Black, Red, Yellow wires attached.

Am positive motor is the problem for anyone who might think it is the capacitor.

Any help much appreciated. Thank you.

PaMel

Replies:

Icequeen

24.68.49.83

"Re(1):Payne Furnace Blower Motor" , posted Fri 29 Feb 00:52

Should change the capacitor when swapping out a motor. Cover all bases.

hennemann

71.230.20.123

"Re(2):Payne Furnace Blower Motor" , posted Fri 29 Feb 07:30

Changed the motor and the capacitor...all is working well...thanks for all the help...much appreciated!

northernfitter

70.53.21.124

"Re(1):Payne Furnace Blower Motor" , posted Sat 23 Feb 15:11

any universal 1/3 dd hp motor will work.

14years as a service tech in Ottawa and the valley. www.reliableheating.ca. For furnace manufacturer ratings go to

http://www.consumerreports.org/cro/appliances/heating-cooling-and-air/gas-furnaces/furnaces-repair-history-205/overview/index.htm?resultPageIndex=1&resultIndex=1&searchTerm=furnace

hennemann

71.230.20.123

"Re(2):Payne Furnace Blower Motor" , posted Sat 23 Feb 15:24

Thanks for the reply -- assume I will have to insure the diameter is the same so as the "buckle" mount will fit the fan blower housing?

PaMel

Technician

66.66.130.234

"Re(3):Payne Furnace Blower Motor" , posted Sat 23 Feb 16:11

If you look at the side of the motor where you found the other info. there should be a frame size. That one is probably a 48Y.

hennemann

207.117.33.135

"Re(4):Payne Furnace Blower Motor" , posted Sat 23 Feb 17:53

Thank you....found it.

PaMel