Original message
| mickabersdad
 |  "Bad Compressor???"
, posted Tue 7 Oct 21:37  
If the ohm reading between Run and Start is 8.5, the reading of Start to Common is 4.6, and Run to Common is 2.2, can the compressor fail to start? This compressor has a hard start, and is very old. I've checked capacitor; found ok. I've checked the contactor for both voltage and continuity; found ok. Originally found compressor hot, and waited over night to try compressor, but it will not come on. Any ideas appreciated.
|
|
