York Diamond 80 not igniting - http://www.hvacmechanic.com/ Forums
Original message
| nnm103
 |  "York Diamond 80 not igniting"
, posted Thu 30 Oct 20:46  
Good evening... Hopefully someone can help.. I have a York Diamond 80 (Model # P2MPD14N08001G) which is not igniting. At first the unit would not go on and I originally thought it was the use of a thick filter (3M).. that is what someone said.. So i replaced the filter with a cheap filter and the furnace ignited. It lasted one day and today, even with no filter it does not ignite. Blower goes on, the ignitor glows red but then no gas to the blowers.. It tries this three times and then after that the red light just keeps blinking.
Any ideas as to what this might be... someone said maybe cloged chimney.... Can't find a manual for the unit anywhere.
Nate
|
|
Replies:
|
| nnm103
| "Re(1):York Diamond 80 not igniting" , posted Thu 30 Oct 21:33
I have a phone call it.. Gave me a dàte next week.. Any ideas in the mean time? Roll out switch??
I tested the two wires going to each roll out switch and they are connected.. Is that right?
Nate
|
| Weber
| "Re(1):York Diamond 80 not igniting" , posted Thu 30 Oct 21:16
You need to call a service company.
Steve Weber
|
| | nnm103
| "Re(2):York Diamond 80 not igniting" , posted Thu 30 Oct 21:31
Got a call in.. Earliest appt was tuesday.. In the mean time..any ideas?? Roll out switch?? I used a connectivity tester and both wires on all 3 roll out switches make contact.. Is that right?
Nate
|
| | yuri
| "Re(3):York Diamond 80 not igniting" , posted Thu 30 Oct 22:37
May be a bad circuit board or gas valve. Do you have any other gas appliances in the house? Do they work? If not there may be a problem with your gas meter and you need to call the utility company (rare) but it happens.
Yuri
|
| | nnm103
| "Re(4):York Diamond 80 not igniting" , posted Thu 30 Oct 23:34
I do have gas in the house and that is working no problem.. Hot water too...
Nate
|
|
|
|  |
|
