Original message
| kozo
 |  "trane"
, posted Mon 21 Jan 01:30:  
i have a trane unit twv036b140a1(split unit w/ no heat pump) and it just started blowing cool air one day. I have changed the theromstat and the air seemed to start blowing a little warmer but it still did not fell right, it still felt cool. I called a service guy out and they said they checked everything, and that everything was working ok. I still dont think that it is working properly. He suggested that I change to a heat pump. I was wondering if any one could give me some ideas and things to check before I do this because I know my unit was working fine before.
[this message was edited by kozo on Mon 21 Jan 01:31] |
| Replies:
|
| street8487
| "Re(1):trane" , posted Sun 30 Mar 22:42
it is possible for one element to fail. will need to check amp draw. but would advise getting a hvac company to check that. they can get parts from a suplier that you might not be able to get.
|
| street8487
| "Re(1):trane" , posted Sun 30 Mar 22:38:
how would a homeowner know suction and discharge pressures. didnt know you could get a guage set at homedepot. call that same company and ask to have a senior tech come out. they do have a one year warranty on there work. call and tell them its the same and you still have a problem. we have guys at my company who have been doing this for years and still know jack. call them back. if you called a small company, good luck. but most larger companys will send a senior tech on callbacks.
[this message was edited by street8487 on Sun 30 Mar 22:42] |
| halocarbure
| "Re(1):trane" , posted Wed 27 Feb 22:03
Do you known the suction and the discharge pressure that will help let me known
If you don't known back up to the basic
|
| aircooled
|  "Re(1):trane"
, posted Tue 19 Feb 18:44
The air handler you have most likely has 15kw of electric heat.
Need to check the contactor to see if it's pulling in and voltage is being supplied to strips. Maybe a limit is out, check your filter and blower to make sure that they are not stopped up and causing the unit to trip out on limit.
"People will forget what you said people will forget what you did but people will never forget how you made them feel."
|
| HankBuck
| "Re(1):trane" , posted Sat 9 Feb 18:53
How many KW is your Heat Strip? Are they all working?
|
|
|
