American Standard Freedom 80 - Furnace Flame Size Problem

[tchad2012]

Thanks again Freon.

I haven't had time until this weekend to examine the pressure switch. It was easy enough to locate from your instructions, however, there is a slight variation on the wiring. One spade connector is doubled up with two wires going to it, and the other spade connector has one wire. Does this change how i should jump the pressure *

[Freon]

" One spade connector is doubled up with two wires going to it, and the other spade connector has one wire. "

Turn off the power. Place a jumper between the 2 spade terminals leaving the existing connections as they are now. Turn on the power and see how the furnace behaves.

BE SURE TO REMOVE THE JUMPER AFTER THIS TEST.