How to reconnect humidifier on Furnace...??

General topics about all things heating, ventilation, air conditioning and refrigeration.

Moderator: juster

Post Reply
Handydude
Minimal
Posts: 1
Joined: Sun Dec 08, 2013 1:53 am

How to reconnect humidifier on Furnace...??

Post by Handydude » Sun Dec 08, 2013 9:12 pm

Hello Folks..Never been on forum xcept bikes and cars..this is an interesting forum I must say..a while ago I had disconnected the Honeywell humidifier from furnace..(2 black wires) now am trying to put it back with new filter after a good clean with CLRI. Humidifier is Honeywell Model 220A1001 Solenoid 24A, 2 black wires come out of the solenoid. The water line is fine when I checked. Any help appreciated. (There is couple of white wires and a black wire loose)..if assisted I can trace that and take it from there.

Freon
Most Valued Contributor
Posts: 1019
Joined: Sat Jun 18, 2011 11:26 am

- How to reconnect humidifier on Furnace...??

Post by Freon » Mon Dec 09, 2013 3:14 pm

You need to refer to the humidity control for complete wiring instructions. See this - w w w .appliancefactoryparts.c o m/content/pdfs/110674-4.pdf. Remove the spaces in the w w w and the c o m

Post Reply