GPH 1536M41 package unit heat pump / AC.
Major and Unusual snow blast in Atlanta. I switched the unit to emergency heat.
As the snow storm progressed, I ran the Emergency Heat Electric Strip.
The temperature is now above 30 degrees and I decided to switch it over
to Heatpump mode. However, I forgot that Ice had formed on the condensor fan blades
effectively "Freezing" Up. After about 5 mins of running, I realized what was going
on and I shut off the units.
I have now poured water over the fan blades and the condesor fan turns freely.
However, In heatpump mode the fan is not turning.
1) Is their a breaker for the Condensor Fan?
2) Did I blow the Condensor Fan?
3) Any other suggestions???