replacement of venter/inducer motor on a LENNOX

[copperbeech]

Our family has a 10 year old G32V and this heating season I could tell that the venter motor was too noisy. However the temperature of it seems fine and the amp draw is fine also. This leads me to believe that I have a bit of time before it needs to be replaced. Of course I would like to know of the approximate price of this 'motor' and the installation cost. (By chance can someone recommend a LENNOX dealer or HVAC company in the Greater Toronto *)

[heatseeker]

300 to 500 american dollars remember if it ain't broke don't fix it. Are you an *

[copperbeech]

heatseeker wrote:
> if it ain't broke don't fix it.

I am just not sure I can continue indefinitely to put up with the extra noise of this motor .

[heatseeker]

ear *

[Freon]

See if it's easy to separate the motor part from the impeller part of the vent assembly. Possible, if you can get the manufacturer and model of the motor you can buy just that part. You can also try a few drops of 50 weight motor oil run down the shaft into the bearings.