ac/heater unit will not *#1068-300

Problems related to residential installations.

ac/heater unit will not *#1068-300

Postby DUDLEYDL » Wed Dec 19, 2012 11:06 pm

my draft blower will not cont. to run it only runs for about 5 to 6 seconds then shut down. the led light flashes 5 times what is the code r meaning to that (help). rudd control board #1068-300 MOD.URKALA024JK082
DUDLEYDL
Minimal
 
Posts: 1
Joined: Wed Dec 19, 2012 10:23 pm

- * unit will not work.*#*

Postby Freon » Thu Dec 20, 2012 4:18 pm

Find where the draft motor plugs into the control board. Unplug it, have someone call for heat and you CAREFULLY test the voltage at the control board. If you see 120 volts at the plug on the control board for more than the 5 to 6 seconds then the draft motor could be the problem. However if the voltage at the board drops to zero then the board may be the problem. Check the board for cold solder joints and especially around the relay that switches the 120 volts to the inducer motor
Freon
Most Valued Contributor
 
Posts: 699
Joined: Sat Jun 18, 2011 11:26 am


Return to Residential