Installing new thermostat, wiring question.

Problems related to residential installations.

Installing new thermostat, wiring question.

Postby afairchild101 » Mon Feb 18, 2013 4:26 pm

Im switching from an old honeywell to a new one, the new one is the RTH7600D. Here is a picture of how the old one was -


The wires aren't labeled at all so I just wired the new one the same way. Here's a picture of the new one how I wired -


I called honeywell customer service and they told me how to program the thermostat since I have a heat pump. Nothing is turning on when I turn it to heat, its 65 in here and I'm putting it on 70 and hold.

Did I wire it wrong?
1 hour ago - 4 days left to answer.
Additional Details
C is connected to a blue wire
G - Green
Y - Yellow
O/B - Orange
R - Red
Aux - white

That's how the new thermostat is set up.
Posts: 1
Joined: Mon Feb 18, 2013 4:24 pm

- Installing new thermostat, wiring question.

Postby Freon » Mon Feb 18, 2013 10:57 pm

Do not use dashes or question marks in the posts. Post the make and model of the heat pump.

Check at the indoor air handler and verify the same colored wires are connected to the same letter designated terminals on the air handler control board as are connected at the thermostat... blue is at C, green is at G, etc
Most Valued Contributor
Posts: 1011
Joined: Sat Jun 18, 2011 11:26 am

Return to Residential