Bryant Plus 90 Replace Flame Sensor

Problems related to residential installations.

Moderator: juster

Post Reply
Amateur10
Minimal
Posts: 1
Joined: Fri Feb 22, 2013 1:47 pm

Bryant Plus 90 Replace Flame Sensor

Post by Amateur10 » Fri Feb 22, 2013 1:52 pm

Hi,
Wondering is you need to remove the inducer blower assembly when replacing the flame sensor, limit Switch, and HSI on a Bryant Plus 90?

Freon
Most Valued Contributor
Posts: 1019
Joined: Sat Jun 18, 2011 11:26 am

- Bryant Plus 90 Replace Flame Sensor

Post by Freon » Fri Feb 22, 2013 3:27 pm

Please post the model number. Do not use dashes, slashes or question marks. Locate the flame sensor and see if you can remove it easily. Usually it's a thin metal rod with a single wire located in the burner area. However I do not know if that's the case for your furnace.

Post Reply