Standing Pilot gas furnace troubleshoot

Problems related to residential installations.

- Standing Pilot gas furnace troubleshoot

Postby juster » Wed Oct 06, 2010 3:35 pm

If the pilot was on (operational) you did not need to change the thermocouple but it does not hurt to have a new one at the beginning of the season. It sounds like the thermostat is sending a signal (you can here it clicking) You may have an electronic problem.

bigwheelingman is correct you need a service tech and especially if you are not that handy with reading a meter.
A tech should be able to help you.
juster
Most Valued Contributor
 
Posts: 124
Joined: Tue Mar 30, 2010 7:40 am

Return to Residential

cron