Glow plug troubleshoot

Problems related to residential installations.

- Glow plug troubleshoot

Postby specialtyclimate » Sun Jul 10, 2011 9:19 pm

after 30 seconds of the venter motor running check for 120v at the ignitor plug. if not present. could have a stuck end switch, pressure switch, etc
Regular Contributor
Posts: 10
Joined: Sun Jul 10, 2011 8:17 pm

- Glow plug troubleshoot

Postby nomadpeo » Mon Jul 11, 2011 12:02 am

ignitor not lighting if i am reading right. this could be the ignitor or possibly the pressure switch not closing when the induced draft motor comes on. it will take a voltmeter to determine which. there are other possibilities that a tech can determine.

you may want to find another 'professional' for the next service call.
Most Valued Contributor
Posts: 278
Joined: Wed Jan 12, 2011 10:10 pm

Return to Residential