high limit tripping

Problems related to residential installations.

Moderator: juster

Post Reply
Posts: 1
Joined: Sat Dec 11, 2010 8:54 am

high limit tripping

Post by riccir1 » Sat Dec 11, 2010 8:59 am

working on a york diamond 80% tripping every 10 to 15 min on high limit made general checks found nothing except that have alot of high low supply setups 24 different 10 *6 openings cut into duct 1200 cfm blower. can having too low a static cause a limit to trip?

Posts: 2
Joined: Sat Dec 11, 2010 2:11 pm

- high limit tripping

Post by ninetyzero » Sat Dec 11, 2010 3:16 pm

From my experience, a high limit only trips under a high static.

I would check to see if all the dampers/diffusers are open 100% because if a few of them are closed off, it may cause a high duct static and trip it out. At least its a place to start.

User avatar
Most Valued Contributor
Posts: 126
Joined: Tue Mar 30, 2010 7:40 am

- high limit tripping

Post by juster » Sun Jan 02, 2011 6:28 pm

Any error codes?

Post Reply