electrc heat

Problems related to residential installations.

Moderator: juster

Post Reply
Posts: 1
Joined: Mon Dec 27, 2010 12:49 pm

electrc heat

Post by stratosman » Mon Dec 27, 2010 12:57 pm

i have a problem with a 1973 GE electic air handler. the heat will only come on and run in the on position not the auto. have tried two diff. thermstates and the same problem. any help would be helpful

Most Valued Contributor
Posts: 278
Joined: Wed Jan 12, 2011 9:10 pm

- electrc heat

Post by nomadpeo » Sun Jan 16, 2011 12:41 pm

an old unit like that may not have accomodation for fan in heat mode. it may depend upon the thermostat turning it on. all thermostats have accomodation to force the fan on when there is a call for heat. examine your thermostat and look for a switch with two positions, either 'g' or 'e'. place the switch in the 'e' position. with some older model thermostats, it requires a wiring change to accomplish this. has the thermostat been changed lately ?

if there are sequencers, a repair needs to be made. in the mean time, the above advice will ensure you have air blowing across the heat strips.

Post Reply