Janitrol 18-60 to Hunter 44132

Problems related to residential installations.

Moderator: juster

Post Reply
Posts: 2
Joined: Sun Mar 27, 2011 9:55 pm

Janitrol 18-60 to Hunter 44132

Post by bradSB » Sun Mar 27, 2011 10:05 pm

Ok so Ive been researching for a while now as I ran into 2 wires the w2/white and the E/black on the Janitrol, now on the Hunter its only asks for aux/E but from what ive read w2 is aux and second stage/heat aux heat, and e/black is emergency heat relay on heat pump, which one should i use or should I use both in same terminal...any idea before I call them up tomorrow? and Ive read * crap but that was before I bought it and tried to return it and found out you only get credited when it gets sent back to hunter. Thanks, Brad

Most Valued Contributor
Posts: 64
Joined: Sat Jan 29, 2011 11:31 am
Location: Virginia Beach, VA

- Janitrol 18-60 to Hunter 44132

Post by 4ftBanger » Mon Mar 28, 2011 6:36 am

On a typical heat pump, E, AUX, and W2 are all the same. If they came off from two separate terminals then use both wires together on the new terminal.
Matt R -
Factory Service Rep for Daikin, LG, Seresco, Climatemaster & Emerson

Post Reply