Janitrol 18-60 to Hunter 44132

Problems related to residential installations.

Janitrol 18-60 to Hunter 44132

Postby bradSB » Sun Mar 27, 2011 10:05 pm

Ok so Ive been researching for a while now as I ran into 2 wires the w2/white and the E/black on the Janitrol, now on the Hunter its only asks for aux/E but from what ive read w2 is aux and second stage/heat aux heat, and e/black is emergency heat relay on heat pump, which one should i use or should I use both in same terminal...any idea before I call them up tomorrow? and Ive read * crap but that was before I bought it and tried to return it and found out you only get credited when it gets sent back to hunter. Thanks, Brad
Posts: 2
Joined: Sun Mar 27, 2011 9:55 pm

- Janitrol 18-60 to Hunter 44132

Postby 4ftBanger » Mon Mar 28, 2011 6:36 am

On a typical heat pump, E, AUX, and W2 are all the same. If they came off from two separate terminals then use both wires together on the new terminal.
Most Valued Contributor
Posts: 64
Joined: Sat Jan 29, 2011 12:31 pm
Location: Virginia Beach, VA

Return to Residential