arcoaire 90% furnaces

Problems related to residential installations.

arcoaire 90% furnaces

Postby pneedham » Sat Sep 10, 2011 1:44 pm

I have an arcoaire n9mp2 90% furnace . During the off cycle the inducer motor cycles on and off rapidly but in the heating or cooling stage it runs normally.
Any Ideas what is happening. I replaced the inducer motor pressure switch it still does the same thing. When I unhook the hose to the pressure switch it runs normally.
Posts: 1
Joined: Sat Sep 10, 2011 12:28 am

- arcoaire 90% furnaces

Postby heatseeker » Wed Sep 14, 2011 10:29 am

it runs in the cooling stage? thats odd. could be problem with relay on circuit board or other control wiring even t-stat. call a pro might be beyond diy.
Most Valued Contributor
Posts: 542
Joined: Wed Jul 06, 2011 9:10 am

Return to Residential