Mobile Home Furnace Problem

Problems related to residential installations.

Moderator: juster

Post Reply
Posts: 1
Joined: Sun Oct 02, 2011 11:45 am

Mobile Home Furnace Problem

Post by colu41 » Sun Oct 02, 2011 11:49 am

I have a mobile home with an electric furnace. Now I have a fan switch that is bad. BUT, when I hardwire the wires together, the fan obviously turns on, but blows cold air. Is there another problem? Or will the fan switch fix this also?

The fan switch when bad last year also. Had a tech come in to diagnos but, found nothing but the fan switch. Any help would be greatly appreciated.

Most Valued Contributor
Posts: 542
Joined: Wed Jul 06, 2011 9:10 am

- Mobile Home Furnace Problem

Post by heatseeker » Mon Oct 03, 2011 10:28 am

the fan switch works in series with the heat sequencers.

Regular Contributor
Posts: 12
Joined: Fri Oct 07, 2011 9:49 pm

- Mobile Home Furnace Problem

Post by surenuff » Sat Oct 08, 2011 12:07 am

Like heat seeker said, if you simply hard wired the fan, you most likely are not bringing on the heaters as well.

Post Reply