Flame Sensor Disconnected

An area where professionals can discuss HVAC /R related issues and topics.

Moderator: juster

Post Reply
Tshooter32
Minimal
Posts: 2
Joined: Thu Dec 16, 2010 10:38 am

Flame Sensor Disconnected

Post by Tshooter32 » Thu Dec 16, 2010 11:35 am

- on the furnace controller board, does the flame sensor(orange) get connected?
what pin number on the 9 pin connector, the wire popped loose so the main burners are not get-
ting lit? could the flame sensor be the problem? Thanks. Tshooter32

hvaclover
New Contributor
Posts: 4
Joined: Wed Jan 05, 2011 3:04 am

- Flame Sensor Disconnected

Post by hvaclover » Wed Jan 05, 2011 3:10 am

I would just add that when a pin connection comes loose it is usually a good idea to put a new pin connector on the sensor wire.
There can be a great deal of intermittent lock out if the old pin fits loosely in the plug.
Just my two cents..

Post Reply