Hello every one. I have a luxaire EABD-F030SA unit.
I went to start the unit this year and the attic blower will run fine no problem. The outside unit is having problems.
When i start the air conditioning the outside unit will kick on and run for about 15-20 minutes before i notice the fan stops spinning. I replaced both the compacitor and start compacitor and had the wiring verified.
A "technician" came out and swapped out the fan motor with same results. Swapped out another one to replace the one he swapped same effect.
He then thought the problem was the circuit board. He bypassed the board and still same effect.
Usually when the fan cuts off you can still hear the compressor running for a little while after.
The tech verified that the freon level was fine but said the voltage being pulled from the fan is reading high on the board... on both fan motors.
Any suggestions.
thanks everyone.
