Replacing WeatherTron Bay 28X138

Problems related to residential installations.

Moderator: juster

Post Reply
OllaTKE
Minimal
Posts: 1
Joined: Sun Jul 24, 2011 6:08 pm

Replacing WeatherTron Bay 28X138

Post by OllaTKE » Sun Jul 24, 2011 6:23 pm

Im trying to replace a WeatherTron Bay 28X138 with a LUX TX1500E. The wires that were connected on the Weather Tron were G, Y, X2, B, W, O, R, T. The letters on the LUX are G,RH and RC are bridged, Y, W, O, B, C. I'm not sure where to connect the wires.

heatseeker
Most Valued Contributor
Posts: 542
Joined: Wed Jul 06, 2011 9:10 am

- Replacing WeatherTron Bay 28X138

Post by heatseeker » Mon Jul 25, 2011 3:56 pm

WHY WOULD YOU BUY A lux t-stat you went down in quality. As far as the wiring give us type of equipment and wire colors going to each letter. If R is jumped to G then your fan would be running constantly. Not right. You might be getting over your head on this one take that lux junk back to home depot and call a tech to install a quality t-stat for you.

nomadpeo
Most Valued Contributor
Posts: 278
Joined: Wed Jan 12, 2011 9:10 pm

- Replacing WeatherTron Bay 28X138

Post by nomadpeo » Thu Jul 28, 2011 7:54 am

were there wires connected to every one of those contacts ? do you know if you have a heat pump ?

Post Reply