Flame Sensor Disconnected

An area where professionals can discuss HVAC /R related issues and topics.

Flame Sensor Disconnected

Postby Tshooter32 » Thu Dec 16, 2010 12:35 pm

- on the furnace controller board, does the flame sensor(orange) get connected?
what pin number on the 9 pin connector, the wire popped loose so the main burners are not get-
ting lit? could the flame sensor be the problem? Thanks. Tshooter32
Tshooter32
Minimal
 
Posts: 2
Joined: Thu Dec 16, 2010 11:38 am

- Flame Sensor Disconnected

Postby nomadpeo » Thu Feb 10, 2011 12:28 am

what brand ? the distributor should have a tech support number with docs to send you if you don't have another access otherwise.
nomadpeo
Most Valued Contributor
 
Posts: 278
Joined: Wed Jan 12, 2011 10:10 pm

- Flame Sensor Disconnected

Postby van » Tue Sep 13, 2011 9:43 pm

some controllers do not use the flame sensor wire, they use the ignition wire to sense. You need to know what manufacturer and the wiring schematic, but I have found that an additional ground is quite helpful from the burner assy. to the controls.
van
Minimal
 
Posts: 1
Joined: Tue Sep 13, 2011 9:18 pm


Return to Technicians Only