Wiring for Honeywell T8411R

Problems related to residential installations.

Wiring for Honeywell T8411R

Postby matthewrylin » Sun Nov 20, 2011 10:36 pm

I have a wiring issue. When I pulled the cover off the thermostat, there are 2 wires that are disconnected. Can someone please tell me which terminal they go to? I have the Green on the G terminal, Blue on the C terminal, Red on the R terminal, Yellow on the Y terminal, then there is a white wire and a light pink wire that aren't connected to anything. There is also an orange wire that is cut too short to connect to anything, so I'm assuming it was never hooked up in the first place. I was trying to hook up a Hunter 44132 programmable thermostat, but changed my mind when I saw this issue. I just want my heat and air to work.

The system is a two-stage heat and one-stage cool heat pump with manual changeover.

Posts: 1
Joined: Sun Nov 20, 2011 10:26 pm

- Wiring for Honeywell T8411R

Postby MTI STUDENT » Mon Dec 05, 2011 4:08 pm

first you need to see whats wired were on the furnace board .
Most Valued Contributor
Posts: 27
Joined: Sun Dec 04, 2011 1:27 am

- Wiring for Honeywell T8411R

Postby heatseeker » Tue Dec 06, 2011 9:46 am

mti---where not were.
Most Valued Contributor
Posts: 542
Joined: Wed Jul 06, 2011 9:10 am

Return to Residential