THM5320R newbie help

General topics about all things heating, ventilation, air conditioning and refrigeration.

THM5320R newbie help

Postby acesup_11 » Mon Nov 21, 2011 8:42 pm

I am a noob and I had my line from my slant fin furnace cut on accident to my thermostat. I can't seem to find a way to get the wire back to it so I decided to get a THM5320R system that included the wireless device for redlink ,and the thermostat. I have two wires that are currently hooked into my thermostat a red one that goes to RH and a white one that goes to W but the current thermostat is battery powered and this new THM5320R wireless unit is not so i do not know how to hook up the wires as when I put them in the same spot on the new module the unit doesnt get power. Can someone please help me out. I would appreciate it a lot. Thank you so much.
acesup_11
New Contributor
 
Posts: 3
Joined: Mon Nov 21, 2011 8:37 pm

- THM5320R newbie help

Postby heatseeker » Tue Nov 22, 2011 4:13 pm

You need a common wire to the t-stat look at the schematic in the furnace and you should be able to figure it out. Be forewarned that when you start messing with the control voltage you are taking a chance of burning out the transformer or blowing fuse.
heatseeker
Most Valued Contributor
 
Posts: 542
Joined: Wed Jul 06, 2011 9:10 am

- THM5320R newbie help

Postby acesup_11 » Tue Nov 22, 2011 4:29 pm

I am sorry that I am not understanding but I still only see two wires coming from the Furnance. Should I be looking any where else would a picture help at all of anything ? Thanks
acesup_11
New Contributor
 
Posts: 3
Joined: Mon Nov 21, 2011 8:37 pm

- THM5320R newbie help

Postby acesup_11 » Wed Nov 23, 2011 10:25 am

Ah I see.... is this something I can do or should I consult a specialist? Also would it have to be an electrician or the guy that usually takes care of my furnace if it breaks.
acesup_11
New Contributor
 
Posts: 3
Joined: Mon Nov 21, 2011 8:37 pm

- THM5320R newbie help

Postby Freon » Thu Nov 24, 2011 11:25 am

The system you have chosen is very nice and also complicated involving careful connections and a dedicated 24 volt transformer (*.forwardthinking.*/related_links/zoning/truezone/install/69-2199-HZ322InstallationGuide.pdf). I recommend you have someone who understands schematic diagrams come and help you wire the control panel to the furnace.
Freon
Most Valued Contributor
 
Posts: 709
Joined: Sat Jun 18, 2011 11:26 am


Return to HVAC General Forum

cron