Blower Motor Direction problem

General topics about all things heating, ventilation, air conditioning and refrigeration.

Moderator: juster

Post Reply
Krypson
Minimal
Posts: 2
Joined: Wed Dec 14, 2011 2:39 pm

Blower Motor Direction problem

Post by Krypson » Wed Dec 14, 2011 2:41 pm

My blower motor stopped working correctly today. It just stalls and hums. I took the motor apart and cleaned and oiled parts. The motor runs but only when coaxed in the right direction. On top of that.. It will run in either direction that i coax it.. It feels like it is not getting a kick in the right direction and just sits at a stalemate. This sounds like an electrical problem to me.. Any ideas?

When not powered motor spins freely and has no problem coasting.

Krypson
Minimal
Posts: 2
Joined: Wed Dec 14, 2011 2:39 pm

- Blower Motor Direction problem

Post by Krypson » Wed Dec 14, 2011 3:39 pm

Ok... Nevermind. I figured it out. It is a blown Capacitor, it regulates the direction the motor will turn.

heatseeker
Most Valued Contributor
Posts: 542
Joined: Wed Jul 06, 2011 9:10 am

- Blower Motor Direction problem

Post by heatseeker » Thu Dec 15, 2011 9:05 am

How do you know the capacitor is faulty?

Freon
Most Valued Contributor
Posts: 1020
Joined: Sat Jun 18, 2011 11:26 am

- Blower Motor Direction problem

Post by Freon » Sat Dec 17, 2011 11:26 am

9 times out of 10, when a PSC motor will run with a little push or run in the wrong direction with a little push, it's the capacitor.

Post Reply