Coleman TM9T problem

Problems related to residential installations.

Moderator: juster

Post Reply
how
Most Valued Contributor
Posts: 87
Joined: Sun Nov 27, 2011 8:07 pm

- Coleman TM9T problem

Post by how » Wed Feb 22, 2012 11:33 am

If a thermostat fails in such a way that it doesn't call for heat, the board doesn't read that as a fault.
If it happens again, (you wanting heat and not getting it and there isn't a fault code) then turn down your thermostat and jumper the thermostat connections on the furnace board (R & W). If the furnace fires up and stays on, then your problem will be in the thermostat or it's wiring.

Post Reply