AC not working, low voltage in the line

An area where professionals can discuss HVAC /R related issues and topics.

AC not working, low voltage in the line

Postby evgenik25 » Thu Aug 23, 2012 12:26 pm

My AC stopped working last night, I tried to troubleshoot the control board in the gas furnace, but discovered that the electrical line that connects to the furnace has 2.2 volts. Voltage is 120 at the fuse and I'm not sure why there is a drop in voltage. Does anyone know what can cause this?

Thanks!!
Last edited by ServiceManager on Tue Apr 16, 2013 10:35 pm, edited 1 time in total.
Reason: A/C can not be seen on all computer, Changed to AC
evgenik25
Minimal
 
Posts: 2
Joined: Thu Aug 23, 2012 10:44 am

- A/C not working, low voltage in the line

Postby Freon » Sun Aug 26, 2012 2:18 pm

Start at the furnace and work backwards to the circuit breaker box (fuse box). Somewhere you have a loose push connection into a receptacle box or a bad wire nut connection. If there's an on/off switch before the furnace, check that first.
Freon
Most Valued Contributor
 
Posts: 699
Joined: Sat Jun 18, 2011 11:26 am

- A/C not working, low voltage in the line

Postby billpaterson » Sat Sep 15, 2012 7:09 am

Please manage a single line for A/C. Do servicing of A/C. Try to inverter A/C . Inverter A/C works on DC; it converts AC to DC and consumes less power.
billpaterson
Minimal
 
Posts: 1
Joined: Sat Sep 15, 2012 6:50 am


Return to Technicians Only