Amana Air Handler Dip Switches

Problems related to residential installations.

Amana Air Handler Dip Switches

Postby wyblepaul » Fri May 24, 2013 7:19 am

Does anyone know what the factory default settings on the dip switches on a amana AVPTC313714 Air Handler?
wyblepaul
Minimal
 
Posts: 2
Joined: Tue May 21, 2013 1:08 pm

- Amana Air Handler Dip Switches

Postby Freon » Fri May 24, 2013 2:25 pm

Google amana AVPTC313714. You will find a listing for Installation instructions.
Freon
Most Valued Contributor
 
Posts: 709
Joined: Sat Jun 18, 2011 11:26 am

- Amana Air Handler Dip Switches

Postby wyblepaul » Fri May 24, 2013 7:42 pm

I did but it tells you to leave all switches in the default setting from the factory and only change the heat kit dip switches 9 10 and 11. Well someone has already tampered with them.
wyblepaul
Minimal
 
Posts: 2
Joined: Tue May 21, 2013 1:08 pm

- Amana Air Handler Dip Switches

Postby Freon » Wed May 29, 2013 1:10 pm

At the bottom of the dip switch charts is an asterisk telling you the settings with the asterisk are the factory default (* indicate factory settings). In the heating they assume you have a 21KW heat strip and therefore it has the asterisk for the default. Once you have the factory defaults set, be sure to watch the LEDs to make sure they verify your settings.
Freon
Most Valued Contributor
 
Posts: 709
Joined: Sat Jun 18, 2011 11:26 am


Return to Residential

cron